Kitchen backsplash tile in Spokane

Measure the kitchen backsplash area

Measure each counter wall from the countertop to the upper cabinets. Note every outlet, switch, window, and open edge. The installer will confirm the measurements before ordering tile.

Plan for outlets and finished edges

Tile adds thickness to the wall. Outlet boxes may need extenders so the cover plates sit flat. An open edge needs a trim tile or metal profile.

Caulk belongs where the backsplash meets the countertop. That joint moves more than the field tile and would crack if it were grouted.

Choose tile that fits the kitchen

Glazed ceramic and porcelain wipe clean. Natural stone needs sealer because grease can stain it. Textured handmade tile takes more work to scrub.

Spokane hard water leaves pale spots near the sink. Dark tile and grout show those spots sooner. Light grout hides mineral film but shows cooking stains.

Backsplash tile can be a separate job

You can call about a kitchen backsplash without adding bathroom work. If you also need a custom tile shower or bathroom tile, mention both projects in the form.

A backsplash does not use a shower pan. Read about shower waterproofing or the factors behind shower tile cost.

Common questions

Can new tile go over my old backsplash?

Sometimes, if the old tile is flat and firmly attached. Often it comes off so the new tile sits flat and the outlets line up. The installer decides after seeing it.

Do I need to remove the countertop?

No. A backsplash goes on the wall above the counter. The counter stays in place.

How do I measure for backsplash tile?

Measure the length and height of each wall section. Note the outlets, windows, and the area behind the range. The installer will confirm the measurements before tile is ordered.